Rockwell-automation 2364P Overhead Bus for Bulletin 2300 MCCs Manual do Utilizador descarregar pdf (Página 7)

Publication 2364P-5.10 - December 1999

7. Mount the bus assemblies to the MCCs as shown in Figure 6 (use the

taptite hardware that was previously removed in step 1). Tighten the

screws.

8. Torque the feeder and bus splices to 45 lb-ft (61 N-m).

9. Install the joiner enclosures for the bus splices and feeder splice (as

shown in Figure 6). Tighten the screws.

10. Install the end cap (see Figure 6). Tighten the screws.

Figure 6

Installation Example–Steps 7 - 10

45 lb-ft

Rear of MCC

M6 self-tapping screws

(typ.)

(61 N-m)

#10 Taptite Screws

Step

M6 self-tapping

screws (typ.)

1 2 3 4 5 6 7 8

Sem comentários

Rockwell-automation 2364P Overhead Bus for Bulletin 2300 MCCs Manual do Utilizador Página 7