Rockwell-automation 20L PowerFlex 700L Frame 2 DC Bus Bar Conversion K Manual do Utilizador descarregar pdf (Página 7)

PowerFlex® 700L Frame 2 DC Bus Bar Conversion Kit SK-L1-DCBS1-F2 7

3. Assemble the flat dielectric support to the top of the drive. Align the flat

dielectric support’s L-shaped clearance slots over the DC- and DC+ bus

bars, place the support on the drive, and fasten the support to the drive

using the four (4) M4 x 12 mm (0.47 in.) long SEMS screws. Tighten to

the torque shown in the drawing.

Step 4: Reinstalling the

Inverter Cassette

Plug the cable connectors into the inverter cassette and reinstall the cassette

in the drive.

Step 5: Documenting the

Change

Record the change on the Field Installed Option label. Use a marker to write

in the kit catalog number (SK-L1-DCBS1-F2).

Step 6: Reinstalling the

Drive Cover

Reinstall the cover onto the drive.

FIELD INSTALLED OPTIONS

Firmware #: Date

Firmware

20-HIM

28-IO-

20-COMM-

20B_-DB1-

HIM

I/O

COM Module

Internal Dynamic Brake

#: Date

FRONT VIEW

(Cover Removed)

Drive Data

Nameplate

1 2 3 4 5 6 7 8

Sem comentários

Rockwell-automation 20L PowerFlex 700L Frame 2 DC Bus Bar Conversion K Manual do Utilizador Página 7