Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Manual do Utilizador descarregar pdf (Página 45)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 45

Chapter 4

Configuring the I/O

This chapter provides instructions on how to configure a Rockwell Automation

ControlLogix controller to communicate with the adapter and connected

PowerFlex drive.

For information on using a PLC-5, SLC 500, or MicroLogix 1100/1400

controller, see Controller Examples for EtherNet/IP Network Communications

with PowerFlex 750-Series Drives, publication 750COM-AT001

Using RSLinx Classic

RSLinx Classic software, in all its variations (Lite, Gateway, OEM, and so forth), is

used to provide a communication link between the computer, network, and

controller. RSLinx Classic software requires its network-specific driver to be

configured before communication is established with network devices. To

configure the RSLinx driver, follow this procedure.

1. Start RSLinx Classic software.

2. From the Communications menu, choose Configure Drivers to display the

Configure Drivers dialog box.

3. From the Available Driver Types pull-down menu, choose EtherNet/IP

Driver.

4. Click Add New to display the Add New RSLinx Driver dialog box.

5. Use the default name or type a name.

6. Click OK.

The ‘Configure driver:’ dialog box appears.

7. Depending on your application, select either the browse local or remote

subnet option.

8. Click OK.

Topic Page

Using RSLinx Classic 45

ControlLogix Example 46

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 189 190

Sem comentários

Rockwell-automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapt Manual do Utilizador Página 45