Rockwell-automation 2094 LIM Remove/Replace Internal Components Manual do Utilizador descarregar pdf (Página 15)

Publication 2094-IN009C-EN-P — April 2008

Removing and Replacing the Line Interface Module Internal Components 15

Replace the Cooling Fan

You will need a #2 phillips screwdriver to replace the cooling fan.

Follow these steps to replace the LIM cooling fan.

1. Verify that all power is removed from the LIM module as

described in Remove/Replace the Front Cover on page 5

2. Connect the replacement fan to the power cord and place the

fan back inside the LIM module.

3. Replace the finger guard and the four phillips screws. Torque

screws to 0.9 N•m (8 lb•in).

ATTENTION

To avoid damage to equipment make sure the fan is positioned

so that airflow is in an outward direction (arrow on fan points

away from the LIM module).

ATTENTION

To avoid injury or damage to equipment, ensure the finger

guard is in place before replacing the four screws.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sem comentários

Rockwell-automation 2094 LIM Remove/Replace Internal Components Manual do Utilizador Página 15