Rockwell-automation 20-COMM-M Modbus/TCP Adapter Manual do Utilizador descarregar pdf (Página 16)

2-2 Installing the Adapter

20-COMM-M Modbus/TCP Adapter User Manual

Publication 20COMM-UM014C-EN-P

Setting the Web Pages

Switch

To use the adapter web pages, the Web Pages Switch must be set to its

“Enable Web” position.

Important:A new switch setting is recognized only when power is applied

to the adapter, or the adapter is reset. If you change a switch

setting, cycle power or reset the adapter to apply the change.

Set the Web Pages Switch SW2 (Figure 2.1

) to enable or disable the adapter

web pages. By default, the adapter web pages are disabled. For complete

details on adapter web pages, see Viewing the Adapter’s Web Pages

page 6-1.

Figure 2.1 Setting Web Pages Switch

SW2 Setting Description

Down (OFF) position Disables the adapter web pages (default setting)

Up (ON) position Enables the adapter web pages

UNUSED

SWITCH

WEB PAGES

SWITCH

Enable Web

Position

Disable Web

Position

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 97 98

Sem comentários

Rockwell-automation 20-COMM-M Modbus/TCP Adapter Manual do Utilizador Página 16