Rockwell-automation 20-COMM-B BACnet MS/TP Adapter Manual do Utilizador descarregar pdf (Página 23)

Installing the Adapter 2-7

4. Secure and ground the adapter to the drive by doing the following:

– On a PowerFlex 70 drive, fold the Internal Interface cable behind

the adapter and mount the adapter on the drive using the four

captive screws.

– On a PowerFlex 700 or PowerFlex 700H drive, just mount the

adapter on the drive using the four captive screws.

Important: Tighten all screws since the adapter is grounded via the

screws. Recommended torque is 0.9 N-m (8.0 lb.-in.).

Figure 2.6 Mounting and Grounding the Adapter

All Frame Sizes:

Adapter mounts in drive.

PowerFlex 70 Drive

Internal Interface Cable

folded behind the adapter

and in front of the drive.

Frames 0 and 1:

Adapter mounts on door.

PowerFlex 700 Drive

Frames 2 and Larger:

Adapter mounts in drive.

Drive

Adapter

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 75 76

Sem comentários

Rockwell-automation 20-COMM-B BACnet MS/TP Adapter Manual do Utilizador Página 23