Rockwell-automation 1792D-2BV0D ArmorBlock MaXum 2 Input Module Series Manual do Utilizador descarregar pdf (Página 5)

ArmorBlock MaXum 2 Input Module Series B 5

Publication 1792D-IN019B-EN-P - September 2000

To install the module:

1. Position the module over the mounted cable base. Align the

three captive screws in the module with the accepting

receptacles in the base.

2. Tighten the screws with a torque of 8 inch-pounds to secure

the module to the base.

Note: Dimensions change according to the cable base and module

combination used.

IMPORTANT

Proper alignment of the screws is necessary to

complete the connections between the module contacts

and the cable contacts.

Align the screws

to properly

assemble the

module to the

base.

Cable Base

1792D-CBFM is used fo

this example.

Assembled

dimensions in

(mm)

41526

(

)

1.9 (48.26)

4.72 (120)

1 2 3 4 5 6 7 8 9 10 ... 15 16

Sem comentários

Rockwell-automation 1792D-2BV0D ArmorBlock MaXum 2 Input Module Series Manual do Utilizador Página 5