Rockwell-automation 1792-IB8/B INSTL.INST ARMOR BLOCK 8 INPUT Manual do Utilizador descarregar pdf (Página 9)

ArmorBlock 8 Input Module

Publication 1792-5.2 – October 1996

Connecting the Input Wiring

Connect input wiring to the micro connectors which screw into mating

connectors on the side of the block.

Make connections as shown below.

I/O Input Micro Connector

Pin 1 = Sensor Source Voltage Positive

Pin 3 = Negative/Return

Pin 4 = Signal

(View into socket)

Pin 2 = Not used

Connecting the DeviceNet Wiring

Connect DeviceNet wiring to the 5-pin mini connector on the end of

the block. Connections are shown below.

DeviceNet Mini Connector

Pin 1 = Drain (Bare)

Pin 2 = V+ (Red)

Pin 3 = V– (Black)

(View into pins)

Pin 4 = CAN–HI (White)

Pin 5 CAN–LO (Blue)

Note: Colors are

DeviceNet standard

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Sem comentários

Rockwell-automation 1792-IB8/B INSTL.INST ARMOR BLOCK 8 INPUT Manual do Utilizador Página 9