Rockwell-automation 1790D-XXXX DeviceNet Digital Base D-Shell Module C Manual do Utilizador descarregar pdf (Página 8)

8 DeviceNet Digital Base D-Shell Block CompactBlock LDX I/O

Publication

1790-IN007C-EN-P - May 2006

Mount the Base Block

Mount the base block to a panel or DIN rail.

We recommend that you ground the panel or DIN rail before

mounting the block.

Mount on a Panel

For panel mounting, use these steps.

1. Place the block against the panel where you want it mounted.

2. Gently pull and position the expansion cover to the left.

3. Place a center punch, nail, or similar device through the

mounting holes in the block and make two marks on the

panel at the lower-left and upper-right corners of the module.

IMPORTANT

The analog base module can accommodate a maximum

of two digital expansion modules.

44153

41 mm

(1.6 in.)

Expansion

Cover

95 mm

(3.74 in.)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comentários a estes Manuais

Sem comentários