Rockwell-automation 1790D-XXXX DeviceNet Digital Base D-Shell Module C Manual do Utilizador descarregar pdf (Página 14)

14 DeviceNet Digital Base D-shell Block CompactBlock LDX I/O

Publication

1790-IN013A-EN-P - September 2006

1. Connect the DeviceNet wiring (drop line) to one of the

DeviceNet connectors, noting that a color-coded wiring

diagram is printed next to the connector on the left side of the

base block.

2. Attach the connector to the base block once you properly

wired the drop line to the connector.

3. Use the locking screws on the connector to fasten it to the

base block, if applicable.

WARNING

If you connect or disconnect the DeviceNet cable with power applied

to this module or any device on the network, an electrical arc can

occur. This could cause an explosion in hazardous location

installations.

Be sure that power is removed or the area is nonhazardous before

proceeding.

Wiring Diagram for

1799-DNETCON

Connector.

Wiring Diagram for

1799-DNC5MMS

Connector.

V+ Red

V- Black

Drain/Shield

Can_H White

Can_L Blue

V+ Red

Can_H White

Drain/Shield

Can_L Blue

V- Black

44164

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentários a estes Manuais

Sem comentários