Rockwell-automation 1771-DBMEM1,1771-DBMEM2 INSTL.INST EEPROM MEMORY M Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Equipamento Rockwell-automation 1771-DBMEM1,1771-DBMEM2 INSTL.INST EEPROM MEMORY M. Rockwell Automation 1771-DBMEM1,1771-DBMEM2 INSTL.INST EEPROM MEMORY MOD. User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 4
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
BASIC Module EEPROM Memory
Module
(Cat. No. 1771-DBMEM1, -DBMEM2)
Installation Instructions
Check the contents of the package for.
8K byte EEPROM (1771-DBMEM1) –or–
32K byte EEPROM (1771-DBMEM2)
If any items are missing, contact your local Allen-Bradley office.
Use this publication as a guide when installing this memory module into
the 1771-DB/B BASIC module.
Before you can install the memory module you must remove the 1771-DB
module from the I/O chassis and disassemble the module.
Refer to the BASIC Module User Manual (pub. no. 1771-6.5.113) for
disassembly instructions.
ATTENTION: To avoid damaging the module with
electrostatic discharge:
Wear an approved wrist-strap grounding device or touch a
grounded object to discharge yourself before
handling any equipment. (Note that the wrist
strap is not supplied with the module.)
Do not touch backplane connectors or
connector pins.
If you configure or replace internal components,
do not touch other circuit components inside the module.
When not in use, keep components in a static-shielded bag.
Installation Notes
Before
Y
ou Begin
17991
Attach this end
to a good earth
ground.
Vista de página 0
1 2 3 4

Resumo do Conteúdo

Página 1 - BASIC Module EEPROM Memory

BASIC Module EEPROM MemoryModule(Cat. No. 1771-DBMEM1, -DBMEM2)Installation InstructionsCheck the contents of the package for.8K byte EEPROM (1771-DBM

Página 2 - the Memory Module

Installation InstructionsEEPROM Memory Module2Follow these instructions to install your memory module.1. Remove the BASIC module from the I/O chassis.

Página 3 - Installation Instructions

Installation InstructionsEEPROM Memory Module3JW2JW35. Set jumper JW2 (select PROM circuitry) to :6. For optimum BASIC module performance, set jumper

Página 4 - With major offices worldwide

Installation InstructionsEEPROM Memory Module4With major offices worldwide.Algeria • Argentina • Australia • Austria • Bahrain • Belgium • Brazil • Bu

Comentários a estes Manuais

Sem comentários