Rockwell-automation 1769-IG16 Compact TTL Input Module Manual do Utilizador descarregar pdf (Página 6)

6 Compact TTL Input Module

Publication 1769-IN079A-EN-P - May 2006

Install the 1769-IG16 Module

Attach the module to the controller or an adjacent I/O module before or after

mounting. For mounting instructions, see Mount Module to Panel Using the

Dimensional Template, or Mount Module to DIN Rail. To work with a system that is

already mounted, see Replace a Single Module Within a System.

The following procedure shows you how to assemble the Compact I/O system.

1. Disconnect power.

2. Check that the bus lever of the module to be installed is in the unlocked

(fully-right) position.

3. Use the upper and lower tongue-and-groove slots (1) to secure the modules

together (or to a controller).

4. Move the module back along the tongue-and-groove slots until the bus

connectors (2) line up with each other.

5. Use your fingers or a small screwdriver to push the bus lever back slightly to

clear the positioning tab (3).

30536-M

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Sem comentários

Rockwell-automation 1769-IG16 Compact TTL Input Module Manual do Utilizador Página 6