Rockwell-automation 1756-M02AS Motion Module Installation Instructions Manual do Utilizador descarregar pdf (Página 9)

SSI Servo Module 9

Publication

1756-IN595A-EN-P - March 2004

Connect the wires as shown below.

Figure 5 Connecting to Spring Clamp and Cage Clamp RTBs

Spring Clamp RTB Cage Clamp RTB

20860-M

20859-M

1. Strip 7/16 inch (11mm) maximum

length of wire.

2. Insert the screwdriver into the

inner hole of the RTB.

3. Insert the wire into the

open terminal and

remove the screwdriver.

1. Strip 3/8 inch (9.5mm) maximum

length of wire.

2. Insert the wire into the open terminal.

3. Turn the screw clockwise to close the

terminal on the wire.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Sem comentários

Rockwell-automation 1756-M02AS Motion Module Installation Instructions Manual do Utilizador Página 9