Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Manual do Utilizador descarregar pdf (Página 12)

2 Rockwell Automation Publication 1734-UM018B-EN-P - October 2013

Chapter 1 Overview of the 1734 POINT I/O EtherNet/IP Adapter

Some of the module’s features are as follows:

• EtherNet/IP messages encapsulated within standard TCP/UDP/IP

protocol

• Common application layer with ControlNet and DeviceNet networks

• Interfacing via Category 5 rated twisted pair cable

• Half/full duplex 10 Mbit or 100 Mbit operation

• DIN rail mounting

• Communication to and from other POINT I/O modules on the same

DIN rail

• Communication supported by RSLinx software

• IP address assigned via standard BootP or DHCP tools

• I/O configuration via RSLogix 5000 software

• No network scheduling required

• No routing tables required

• Support of connections from multiple controllers simultaneously

You must use RSLogix 5000 to configure these features. For more details on

configuration, see Configuration Requirements

in Chapter 3.

What the Adapter Does

The I/O adapters perform the following primary tasks:

• Control of real-time I/O data (also known as implicit messaging) - the

adapter serves as a bridge between I/O modules and the network

• Support of messaging data for configuration and programming

information (also known as explicit messaging)

EtherNet/IP Network

Other

Network

Devices

POINT

I/O

ControlLogix

I/O

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 117 118

Sem comentários

Rockwell-automation 1734-AENT, Series B POINT I/O EtherNet/IP Adapter Manual do Utilizador Página 12