Rockwell-automation 1734-8CFGDLX POINT I/O Module with 8 Configurable Manual do Utilizador descarregar pdf (Página 8)

8 POINT I/O Module with 8 Configurable 24V DC Points and DeviceLogix

Publication

1734-IN039A-EN-P - March 2009

1734-TOP Base

Follow these steps to install the module.

1. Use a bladed screwdriver to rotate the keyswitch on the mounting

base clockwise until the number required for the type of module being

installed aligns with the notch in the base.

2. Make certain the DIN-rail locking screw is in the horizontal position.

(You cannot insert the module if the locking mechanism is unlocked.)

3. Insert the module straight down into the mounting base and press to

secure. The module will lock into place.

Turn the keyswitch to align

the number with the notch.

Notch position 1 is shown.

Be sure the DIN-rail

locking screw is in the

horizontal position.

44228

44710

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Sem comentários

Rockwell-automation 1734-8CFGDLX POINT I/O Module with 8 Configurable Manual do Utilizador Página 8